Huawei y541-u02 Firmware Download and Step by Step Installation Guide

0

Huawei y541-u02 Firmware Download and Full How to Install Guide

Looking for the Official Stock Firmware of Huawei y541-u02 Honor Bee, then you are at the right place, because in this post you find the Huawei y541-u02 firmware download link and installation guide.

About Huawei Y541

Huawei is a Chinese company found in 1987.

Huawei Y541 Honor Bee smartphone was launched in July 2015.

The phone comes with a 4.50-inch touchscreen display.

The Huawei Y541 is powered by 1.2GHz quad-core processor. It comes with 1GB of RAM and 8GB of internal storage that can be expanded up to 32GB via a microSD card.

As far as the cameras are concerned, the Huawei Y541 packs a 8-megapixel primary camera on the rear and a 2-megapixel front shooter for selfies.

The Huawei Y541 runs Android 4.4.1 and is powered by a 1730mAh non removable battery.

Let’s proceed Further !

How to download and flash Huawei y541-u02 Firmware

How to download and flash Huawei y541-u02 Firmware

Download Link of Huawei Y541-U02 Honor Bee Stock Firmware

Below is the download link of Huawei Y51-U02 Firmware.

   Download Huawei Y541-U02 Honor Bee Firmware

How to Flash Firmware on Huawei Y541-U02

  1. First Download the Stock Firmware of Huwaei Y541-U02 Honor Bee from above link.
  2. Download and Install Speedtrum USB Driver on your PC.

   Download SPD USB Driver

  1. Now Download and extract SPD ( Speedtrum Upgrade Tool) Flash Tool.

   Download SPD Flash Tool

  1. You will see the following files after extracting SPD.
ResearchDownload in SPD Tool

ResearchDownload in SPD Tool

  1. Now open, ResearchDownload.exe.

  1. After opening SPD tool, switch off and connect your device to PC.
  2. Once your Huawei is connected successfully to your PC. Click on the Load Pack button and select .pac file.
add .pac File in SPD Tool

add .pac File in SPD Tool

  1. Once you have successfully add the .pac file on SPD tool, click on Start Downloading Button to start flashing.
Start Flashing Process in Spd tool

Start Flashing Process in Spd tool

  1. During Flashing process your Huawei device will restart automatically. Once flashing process is completed you will be able to see green passed button on SPD tool.
Flashing Process is happening in SPD Tool

Flashing Process is happening in SPD Tool

  1. Now you have successfully flashed Huawei y541-u02 Firmware. Enjoy !
Flashing Process completed for Huawei y541-u02

Flashing Process completed for Huawei y541-u02

To check if you have successfully flashed firmware on your Huawei y541-u02 or not, go to Settings > About Phone > Check Firmware.

Also See: How to Install Android Nougat on Xiaomi Mi Max | Custom CyanogenMod 14.1 | Lineage OS 14.1

Summing Up !

I hope you liked the article on how to download and install Huawei y541-u02 firmware.

If you have any question or doubt in your mind just ask me in the comment section below, i will help your for sure. 

Stay tuned for more such posts and If you liked our tutorial then Please Subscribe us on Youtube for Tech Videos. You can also find us on Facebook and Twitter and Google Plus. Sharing our Article on Social Media will be appreciated. Good Bye. Stay tuned for more such posts.

Follow Me !

Sachin Mishra

Author at AndroidRom
Young part time blogger. Writes about tech stuffs. CEO and admin of AndroidRom. Moto: You are responsible for all your failure in your life.
Follow Me !
Share.

About Author

Young part time blogger. Writes about tech stuffs. CEO and admin of AndroidRom. Moto: You are responsible for all your failure in your life.

Leave A Reply